With the Raspberry Pi turned on and the camera connected, open a terminal and type the command : $sudo raspi-confiĪ window like the one below will open, go to suggestion 5 entitled “Interfacing Options” and press Enter. Close the latch, test that the cable is securely held in place, and turn the Raspberry back on once you have completed these steps. To capture a png image, use the -e switch to specify. Gently pull the lock on the CSI port to release it and insert the camera cable without forcing it. Open a terminal and enter the command to start the camera, take a picture and save it as still-test.jpg. PiCamV2 and its connection (note that the RaspberryPi Zero does not have a CSI port like other Raspberry models, so you need to buy a special Raspberry Pi Zero flex cable).įirst, turn off your Raspberry to insert the camera cable into the CSI port.Raspberry Pi with a Linux distribution (for example Raspbian).It is also possible to perform live image processing, such as line tracking for a robot. This component allows you to take photos and videos. One of the most interesting elements to add is the Raspberry Pi Camera V2 or PiCam.

Raspberry pi zero camera install